How to Use Preparation and Application:
Mix: 32 ounces CSP with each gallon of water.
Apply to area liberally with a sprayer, brush or mop.
Allow to sit at least 5 minutes, adding more if needed to ensure the area stays saturated wet and does not dry out.
5 minutes sitting time is sufficient for removing waxes, thorough cleaning and degreasing.
For removing glues, sealers, and tire marks, allow to sit up to 30 minutes.
Scrub area with a stiff scrub brush (preferably straw), a floor scrubber or a floor buffing machine with aggressive scrubbing pads. Work in sections and mop up or wash off each area as you go. Repeat and spot scrub as needed. After completing entire area, allow to dry and final clean with T.S.P. or soap and water and rinse well with clean water.