How to Use PREPARATION:
Thoroughly clean surface and allow to completely dry prior to applying sealer.
Ensure any concrete acid stain residue has been
thoroughly neutralized and rinsed. Surface must be free of oil, dirt, grease and other contaminants which might prevent adhesion or negatively affect the bond.
APPLICATION METHODS: Ensure Adequate Ventilation.
Can be sprayed and/or rolled on. For most surfaces, rolling with a 1/4" - 3/8" nap paint roller is suggested.
Apply in two very thin and even coats. A third coat can be applied if needed, to smooth out any patchy or dry looking areas. Do not allow to puddle. Allow to dry between coats until completely clear. Usually 1 - 2 hrs.
Avoid applying in direct hot sunlight, extreme heat, high humidity or if rain or fog is expected within 12 hours. Allow to cure at least 24 to 48 hrs before waxing or allowing traffic. Takes 7 days to fully cure. Best application temps: 50 F - 90 F. Ideal Humidity 50% - 60% or less. Maximum 70%.